Table of Contents
Advertisement
9.7
Software version
You can view the current software version using for your handset and base.
1.
Press the left
2. Press the left
3. Press the left
9.8
Registration
Up to 6 handsets can be registered to one base station. Additional handsets
must be registered to the base before you can use them.
•
The instructions described below apply specifically to your handset. If you
wish to register another manufacturer's handset, the instructions may vary.
In this case, please refer to the manufacturer of the additional handset.
•
The Master PIN is required before you can register or unregister handsets.
The PIN is 0000.
9.8.1
Register a handset
1.
Press the left
2. Press the left
3. Press the left
4. Press the left
a beep.
5. Press the left
6. Enter the PIN if necessary. It will take less than 2 minutes for the handset to
complete the registration.
9.8.2
De-register a handset
1.
Press the left
2. Press the left
3. Press the left
4. Press the left
5. Press the left
9.9
Change the system PIN
The system PIN is different from the call control PIN and remote access PIN.
1.
Press the left
2. Press the left
3. Press the left
4. Press the left
5. Press the left
42
key, scroll
to
U
C
key, scroll
to select
E
C
key to see the information.
C
key in standby, scroll
C
key, scroll
to select Registration.
E
C
to select Register.
key, scroll
E
C
key. Then press and hold
C
key on the handset to start the registration.
C
key in standby, scroll
C
key, scroll
to select Registration.
E
C
to select De-register.
key, scroll
E
C
key. scroll
or
U
C
key. Enter the PIN if necessary. De-registration is complete.
C
key, scroll
to
U
C
key, scroll
to select
E
C
key, enter the 4 digit PIN.
C
key, enter the 4 digit PIN again.
C
key to confirm.
C
Settings.
S/ware
version.
to
Settings.
U
on the base until you hear
F
to
Settings.
U
to select the handset you want to delete.
E
Settings.
Change Sys.
PIN.
Settings
Hide quick links:
Advertisement
Table of Contents
