Contacts; Store A Name And Number - Motorola D8711 Manual

5.

Contacts

You can store up to 3000 names and numbers in your home phone's contacts
or downloaded from 2 mobile phones. Each record can store up to 3 numbers.
Names can be up to 25 characters long and numbers up to 24 digits. You can
use each number to make a call using the landline or a connected mobile line.
5.1

Store a name and number

If the phone is connected to a switchboard, you may need to enter a pause in a
stored number. This gives the switchboard time to find an outside line. A pause
is normally stored after the switchboard access code (e.g. 9).
When storing a number, press and hold
can continue storing the phone number.
If you have subscribed to Caller ID Service and wish to display the name of
your caller as well as the number, save the full telephone number including the
area code to your contacts.
You can store multiple entries under the same name. However, to prevent
unnecessary duplicated entries, you can only store the same number once.
J
1. Press in standby to access the contact list.
2. Press the left
3. Press the left
4. Enter the home number and press
5. Enter the mobile number and press
6. Enter the work number and press
7. Press the left or right navigation key to select a ringtone.
8. Press the left
Note
You must enter at least the name and one number in order to save the contact.
Entering names
Use the keypad letters to enter names, e.g. to store Tom:
8
Press once to enter T.
6
Press three times to enter o.
6
Press once to enter m.
Writing tips
Press the right
C
Press the left or right navigation key to move between characters.
Press to insert a space.
0
Press to switch between the uppercase, lowercase letters and numbers.
#
Contacts
key, select Add
C
key, enter the name and press
C
key to save.
C
key to delete the last character or digit.
until the display shows P. Then you
0
contact.
E
.
E
.
E
.
E
.
27