Advertisement
To pair a scala rider Q1 headset with your GPS:
1. Turn the scala rider Q1 module on by pressing and holding the Control button until three (3) blue flashes appear.
2. With the Q1 flashing slowly in blue, press and hold the Volume Down button until you receive a red and blue
alternating flash.
3. Once the Q1 module is flashing red and blue alternating, search for/Add a Bluetooth 'audio' device/headset from
your GPS.
4. The GPS should momentarily discover the 'scala rider Q1'. If prompt for a pass key, this will be four zeros (0000).
5. The GPS should momentarily confirm that the pairing has been completed, and the headset should return to
stand‐by mode.
Please feel free to contact us if we can assist you with any other questions.
Best regards,
Technical Support
Cardo Systems, Inc.
Phone: +1 412.788.4533
Fax: +1 412.788.0270
Toll Free: +1 800.488.0363
International: +49.894.503.6819
support@cardosystems.com
www.cardosystems.com
Advertisement
