Table of Contents
Advertisement
CONVENIENT FUNCTIONS
The following functions are available
from the remote control handset only.
14
5Q40201A P08-17
TV/AV Selection
CHANNEL RETURN
CALL
MUTE
SKIP FUNCTION
After all channels available in your area have been set in
memory, you can skip unwanted channels as follows.
1
2
3
NOTE:
To cancel the SKIP function, press Direct Channel Selection
buttons (0-9) to select the channel which you want to cancel,
then press CANCEL again.
14
For receiving the desired signal:
Press 0/AV to select the TV or AV mode.
+0 #
TV position - to view a
normal TV.
This button allows you to go back to the previous channel
by pressing CH RTN. Press this button again to return to the
channel you were watching.
When you press this button once, the channel number will
appear. Press this button again, then the display will
disappear.
When MUTE is pressed, the TV sound will be turned off
completely. To disable this function, press the button again
or VOLUME
or
.
Press CH
or
to select the channel which you want to
skip.
Press CANCEL.
When a channel is skipped, the channel number will blink.
Skip all unwanted channels the same way following steps
1-2.
8/4/04, 1:58 PM
)8
AV position - to receive
through the direct Video
input. AV1 (from 21 pin
SCART socket on the rear)
or AV2 (from Audio/Video
in jacks on the front)
indicator appears on the
screen in AV mode.
Advertisement
Table of Contents
