Buffalo TeraStation HS-DTGL/R5 User Manual page 6

Make sure that the power
switch. on. the. rear. of. the.
TeraStation. is. in. the. ON.
position, with the "I" symbol
pressed down.
Press. the. power button. on. the.
front panel. The LED's will swirl
as your TeraStation boots up.
After your TeraStation has completed booting up and the LED's have
ceased to swirl, check the LINK/ACT LED.on.the.front.of.the.TeraStation.. .
If it's lit, then your TeraStation is connected properly, and you can go on
to page 8. If it's not lit, turn to page 7 for troubleshooting.
TeraStation Quick Setup
6