Figure 33 2.5" Drives And 3.5" Drives; Table 16 Status And Meaning Of Each Led (Operation Panel [Controller Enclosure (Eternus Dx900 S5)]); Table 17 Status And Meaning Of Each Led (Drive) - Fujitsu ETERNUS DX S5 Series Operation Manual (Basic

A. Component Names
Controller Enclosure
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 16 Status and Meaning of Each LED (Operation Panel [Controller Enclosure (ETERNUS DX900 S5)])
LED name
POWER
IDENTIFY
FAULT
MAINTENANCE
READY
■
Drives
2.5" drives and 3.5" drives have LEDs.
Figure 33 2.5" Drives and 3.5" Drives
2.5" drive
DRIVE READY LED
DRIVE FAULT LED
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 17 Status and Meaning of Each LED (Drive)
LED name
DRIVE READY
DRIVE FAULT
LED status
(green)
(blinks blue)
(amber)
(blinks amber)
(green)
(blinks green)
(green)
3.5" drive
DRIVE READY LED
DRIVE FAULT LED
LED status Meaning
The drive is in normal status.
(green)
(blinks green)
•
(amber)
•
108
Meaning
Power is supplied to the controller enclosure.
The installation location of the controller enclosure is identified
according to the instruction that is issued from ETERNUS Web GUI or
ETERNUS CLI.
The controller enclosure is in error status.
A part of the controller enclosure requires preventive maintenance.
The controller enclosure is currently under maintenance.
The controller enclosure is currently under maintenance (from
ETERNUS Web GUI or ETERNUS CLI), or a status check of the ETERNUS
DX is necessary.
The controller enclosure is available for use.
The drive is in error status.
The LED light up operation was performed from the ETERNUS CLI
command line in order to identify the drive location.
Operation Guide (Basic)