Mitsubishi Electric EB-50GU-A Instruction Book page 54

7-3-2. Making the interlocking action settings
(1) Setting an Output Unit Type and Actions
Select an Output Unit Type and set the Actions, referring to the table below.
Output Unit
Type
Group
Free Output
Points
*1 The available setting options vary, depending on the connected indoor unit model.
Make the interlocking action settings that are available for the output units.
*2 The operation modes for Air To Water (PWFY) unit are not available for selection.
*3 The Setback mode can be selected on the EB-50GU-A, but not on the EB-50GU-J.
*4 The set temperature for Air To Water (PWFY) unit cannot be set.
Table 7-2 Interlocking action settings
Output
unit icon
Setting item
ON/OFF
Mode
*1 *2
Set Temp. *1 *4
Air direction *1
Fan speed
*1
Prohibit Remote Controller
Operation (ON/OFF)
Prohibit Remote Controller
Operation (Mode)
Prohibit Remote Controller
Operation (Set Temp.)
ON/OFF
Actions
ON, OFF
Air conditioning unit group:
Cool, Dry, Fan, Heat, Auto, Setback
LOSSNAY unit group:
Bypass, Heat Recovery, Auto
Desired temperature
Mid3, Mid2, Mid1, Mid0, Horizontal, Swing, Auto
Low, Mid2, Mid1, High, Auto
Permit, Prohibit
Permit, Prohibit
Permit, Prohibit
ON, OFF
54
Setting options
*3