Power Supply Circuit - Makita DCS550 Technical Information

W
iring diagram
[3] Wiring in Handle
Route Lead wires as illustrated in Fig. D-6.
Fig. D-6

Power supply circuit

Assemble Power supply circuit to Handle R
with Lead wire (white) on Handle R side.
Handle R
Lead wire (white)
Lead wire holders
Line filter (short)
Note: Line filters are not used for some countries.
Fix lead wires in lead wire holders
as designated by arrows.
Pass Lead wire (black) from Endbell complete through
Line filter, then connect the lead wire to Switch terminal No. 1
and place the line filter as drawn below.
Lead wire holders
Coil Lead wires (red, black) once
into Line filter one by one.
P 13/ 13
Line filter (long)
Controller