Find Ip Address - D-Link VTA-VR User Manual

Chapter 3 - Configuration

Find IP Address

The VTA telephone adapter has a built-in configuration utility.To access this utility, you need
to obtain the IP address of the VTA. By default, the VTA telephone adapter automatically
obtains an IP address from your DHCP enabled router or DHCP server.
To find the IP address, log into your router or DHCP server and locate the DHCP table
(reference the User Manual for your router or DHCP server as necessary). The table
will display all of your network clients (using DHCP) that are connected. Search for the
Vonage VTA's MAC address in the table and the IP address will be listed next to it. The
MAC address is on the bottom of the Vonage VTA device.
If your router has DHCP disabled, you will need to temporarily enable it to obtain an IP
address for the VTA telephone adapter. Once you obtain the IP address, log in to the VTA
and configure it for a static IP address as detailed in the Static IP Address section. Then
you may once again disable DHCP on your router.
Note: The terms MAC Address and MAC ID are used interchangeably.
D-Link VTA User Manual 9