D-Link AirPlus G DWL-G650X User Manual page 10

Getting Started (continued)
Setting up a Wireless Ad-Hoc Network
Install the D-Link DWL-G650X Wireless Cardbus Adapter into one Apple
Powerbook. (See the Quick Installation Guide included with the product for
installation instructions.)
Install another DWL-G650X into an Apple Powerbook.
(See the Quick Installation Guide included with the product.)
Set the wireless configuration for the adapters to Ad-Hoc mode, set the
adapters to the same channel, and assign an IP address to each computer
on the Ad-Hoc network. (See the box below).
When assigning IP addresses to the computers on the network, please remember
that the IP address for each computer must be in the same IP address range
as all the computers in the network, and the subnet mask must be exactly the
same for all the computers in the network.
For example: If the first computer is assigned an IP address of 192.168.0.2 with a
subnet mask of 255.255.255.0, then the second computer can be assigned an IP
address of 192.168.0.3 with a subnet mask of 255.255.255.0, etc.
IMPORTANT: If computers or other devices are assigned the same IP address,
one or more of the devices may not be visible on the network.
IP Address
10