Using The Configuration Utility - D-Link DWL-AG132 Manual

DWL-AG132 User's Manual

Using the Configuration Utility

D-Link Air Premier
management software. The utility provides the user an easy interface to change any
settings related to the wireless adapter. After you have completed the installation of the
DWL-AG132 (refer to the Quick Installation Guide that came with your purchase)
whenever you start the computer, the Configuration Utility starts automatically and
the system tray icon is loaded in the toolbar (see illustration below.*) Clicking on the
utility icon will start the Configuration Utility. Another way to start the Configuration
Utility is to click on Start>Programs>D-Link Air Premier AG >D-Link Air Premier AG
Utility.
If you are using Windows XP, you can use either the Zero Configuration Utility or the
D-Link Configuration Utility.
To use the D-Link Configuration Utility with XP,
right-click on the wireless network icon in the
taskbar in the lower right-hand corner of your
computer screen.
In the window that appears, select View
Available Wireless Networks and click the
Advanced button. The screen at right will
appear.
Select the Wireless Networks tab.
Uncheck the box in the properties window
that enables windows configuration.
After you have done this, you can then use the D-Link
Configuration Utility with XP by clicking on the D-Link
Configuration Utility icon.
If the icon does not display in the taskbar, then click on
this icon on your desktop to open.
D-Link Systems, Inc.
®
AG DWL-AG132 uses the Configuration Utility as the
Using the Configuration Utility
*Configuration Utility
icon in the system tray
12