Using The Configuration Utility - D-Link DWL-120+ Quick Installation Manual

Using the Configuration Utility

A.
MAC Address of the
Access Point that is
associated with the
DWL-120+.
A
B
C
D
E
F
C. TxRate: The default
setting is 11Mbps;
however, TxRate settings
are automatically
determined by the DWL-
120+ depending on the
distance from the access
point.
Appendix
Status: Displays the
D. Channel:
channel information. By
default, the channel is set
to 6 and selection is
automatically determined
by the Access Point.
:
B. SSID The Service Set
Identifier is the name
assigned to the wireless
network. The factory SSID
setting is set to default
Displays the
E.
Signal Strength:
Displays the wireless
signal strength for the
DWL-120+ wireless
connection to the
access point.
Link Quality /