External Features; Port Connectors - D-Link DP-100 Hardware User's Manual

DP-100 Multiprotocol Ethernet Print Server User's Guide
Windows-based setup and administration software, PS Admin, is supplied
with the DP-100, making configuration and management quick and easy.
The DP-100 also supports configuration and management via the
telnet
protocol for networks without Windows-compatible machines.

External Features

This section describes the externally visible features of the DP-100 print
server.

Port Connectors

The DP-100's three printer ports are located on its rear panel. Two identical
parallel ports are labeled LPT1 and LPT2; the single serial port is labeled
COM. These printer ports are independently configurable using the PS
Admin program or the print server's interface. (See the Print Server
telnet
Administration User's Guide for information about configuring the print
server's ports.)
Figure 1 -2 Port Connectors
3
Introduction