Configuring Network Services - D-Link DFE-538TX Quick Installation Manual

Configuring Network Services

1. Open the Apple menu.
2. Go to Control Panels>AppleTalk control panel.
3. Select Ethernet from the Connect via: list box.
4. Do not choose DLKRTS Ethernet. If you do not see it, go back to the
beginning of this guide and install the drivers again.
5. When the installation is successful, and you have completed this step,
choose "Quit" from the "File" menu.
6. Click "Save" when prompted to save the new settings.
7. Open the Apple menu again.
8. Go to Control Panels>TCP/IP control panel.
9. Select Ethernet from the Connect via: list box.
10. From the Configure: list box, choose "Using DHCP Server" if you are
automatically assigned a "Dynamic IP address." If you are not
automatically assigned an IP address, choose "Manual" for a "Static IP
address."
11. Choose "Quit" from the "File" menu.
12. Click "Save" when prompted to save the new settings.
Your adapter is now ready to network with other computers.
Restart your computer one more time.