Honeywell CT50 HomeBase Quick Start Manuals page 6

LED
Battery
Mount the HomeBase
You can mount the HomeBase on a flat, horizontal surface such
as a desktop or workbench with an optional DIN rail.
Mounting hardware required:
• DIN rail
• 3/16-inch diameter x 5.8-inch long pan head screw
• 1/2-inch OD x 7/32-inch ID x 3/64-inch thick washer
• 3/16-inch diameter nut
1. Slide the DIN rail into the slot on the bottom of the Home-
Base.
2. Secure the DIN rail to the flat surface with the hardware.
Status
Solid green
Solid amber
Blinking red
Description
The battery is connected to
external power and is fully
charged.
The battery is connected to
external power and is charging.
There is a battery charging fault,
such as over-temperature.