Page 2
Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.
TABLE OF CONTENTS Customer Support ........................iii Technical Assistance ......................iii Product Service and Repair ....................iii Limited Warranty ........................iii Chapter 1 - About the FlexDock ..............1 Model Overview..........................1 DX1 Desktop Dock and DX2 Dual Dock................1 DX4 Quad Dock ........................
Page 4
To download and install the software update ............8 About Custom Configurations....................8 Optional FlexDock Accessories ....................9 Chapter 2 - Troubleshoot the FlexDock............1 Ethernet LED Does Not Turn On ....................1 Problem ............................1 Possible Causes and Solutions...................1 Charge LED Does Not Turn On ....................1 Problem ............................1 Possible Causes and Solutions...................2 Appendix A - Specifications................3...
Honeywell International Inc. provides service for all of its products through service centers throughout the world. To obtain warranty or non-warranty service, return your product to Honeywell (postage paid) with a copy of the dated purchase record. To learn more, go to www.honeywellaidc.com...
CHAPTER ABOUT THE FLEXDOCK The FlexDocks power your computers, printers, and scanners, and charge spare batteries. Each dock is available with a combination of product cups and battery cups to match your products and batteries. Each battery cup can charge up to two batteries at once.
Page 8
computers Ensure all components are dry prior to mating the and batteries with peripheral devices. Mating wet components may cause damage not covered by the war- ranty. ﺕ ﻭﺍﻟﺒﻄﺎﺭﻳﺎﺕ ﺑﺎﻷﺟﻬﺰﺓ ﺍﻟﻄﺮﻓﻴﺔ. ﻓﻘﺪ ﻳﺆﺩﻱ ﺗﻮﺻﻴﻞ ﺍﻟﺤﻮﺍﺳﻴﺐ ﺗﺄﻛﺪ ﻣﻦ ﺃﻥ ﺟﻤﻴﻊ ﺍﻟﻤﻜﻮﻧﺎﺕ ﺟﺎﻓﺔ ﻗﺒﻞ ﺗﻮﺻﻴﻞ ﺍﻟﻤﻜﻮﻧﺎﺕ...
Asegúrese de que todos los componentes estén secos antes de conectar las computado- ras y baterías con dispositivos periféricos. La conexión de componentes húmedos puede provocar daños no cubiertos por la garantía. Asigurați-vă că toate componentele sunt uscate, înainte de a asocia computerele și bateriile cu dispozitive periferice.
Connect the DX1 USB host USB client port port To power supply About the DX1 USB Ports Use the USB client port (requires a Micro-USB connector) to connect the DX1 to your desktop PC. The USB host port is intended for use with the Ethernet or Modem Adapter accessories.
Install the Optional Retaining Clip for DX1 and DX2 For the DX1 and DX2, you can use the optional retaining clip to secure the power supply cord to the dock. Connect the DX4 To power supply To Ethernet To Ethernet devices network (Ethernet...
Flashing Amber Battery fault. Something is wrong with the battery, or you are trying to charge a battery not approved by Honeywell. Note: If you place a battery in the cup and the Charge LED does not flash or stay on, the FlexDock may not be connected to power.
Charge Computers, Printers, and Scanners Place the computer, printer, or scanner in the product cup. Make sure the product is inserted all the way into the bottom of the cup. The Battery Status LED on the product turns on, showing that the product is charging. Batteries in: •...
LED Color Description None Computer is not communicating with the dock, or the dock is not connected to power. Use the CK3, CN3, and CN4 with the DX4 Ethernet Dock To use a CK3, CN3, or CN4 computer with the DX4 Ethernet dock, you need to install a software update on the computer as described in the next procedure.
• The CK3, CN3/CN4, and CN50 computer cups have been tested and certified for use with the Quad Base. These cups have not been tested or certified for use with the Desktop or Dual Bases. • The SR61 scanner and the PR2/PR3 printer cups have been tested and certified for use with the Dual and Quad Bases.
CHAPTER TROUBLESHOOT THE FLEXDOCK Ethernet LED Does Not Turn On Problem You place a computer in to a cup and the Ethernet LED does not turn on. Possible Causes and Solutions The computer may not be fully inserted into the charging cup. Make sure the com- puter is seated all the way into the cup.
Possible Causes and Solutions The battery may not be fully inserted into the battery cup. Make sure the bottom of the battery is fully inserted into the bottom of the cup, and that the top of the bat- tery is pressed all the way under the tab. The dock may not be connected to power.
APPENDIX SPECIFICATIONS DX1 Specifications Model Number 1002UU01 Dimensions 23.1 cm x 12.7cm x 11.4 cm (max.) (9.1 in x 5.0 in x 4.5 in) USB 2.0 Compliant Power Requirements 100 to 240 VAC, 47-63 Hz, 1.0 A Charging Temperature 5°C to 35°C (41°F to 95°F) Note: Height does not include products or batteries installed in dock.
DX4 Specifications Model Number 1002UU03 (Ethernet) 1002UU04 (charge-only) 1002UU04 (Printer, charge-only) 1002UU05 (Ethernet) Dimensions 44.45 cm x 12.7cm x 11.4 cm (max.) (17.5 in x 5.0 in x 4.5 in) Ethernet 10/100 Base-T supported Power Requirements 100 to 240 VAC, 50-60 Hz, 1.5 A Charging Temperature 5°C to 35°C (41°F to 95°F) Note: Height does not include products or batteries installed in dock.
Page 22
Honeywell 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com ™ 934-058-006 REV A 02/19...