Motorola FR6874 User Manual page 106

Troubleshooting the FR6874 (Continued)
Table 7-1
Problem
FR6874 shuts off.
Tapping the window
buttons or icons does
not activate the
corresponding feature.
A message appears
stating that the
FR6874 memory is
full.
FR6874 keeps
powering down to
protect memory
contents.
Cause
FR6874 is inactive. The FR6874 turns off after a period of inactivity. If the FR6874 is
running on battery power, set this period from 1 to 5 minutes, in
one-minute intervals. If the FR6874 is running on external power,
set this period to 1, 2, 5, 10, 15, or 30 minutes.
Check the Power window by selecting
and tapping the
the setting for a longer delay before the automatic shutoff feature
activates.
Battery is depleted. Replace the battery.
Battery is not Insert the battery properly. See Installing the Main Battery on page
inserted properly. 1-6.
Screen is not Re-calibrate the screen. See Calibrating the Screen on page 1-8.
calibrated correctly.
The system is not Warm boot the system. See Resetting the FR6874 on page 2-14.
responding.
Too many files Delete unused memos and records. If necessary, save these
stored on the records on the host computer (or use an SD card for additional
FR6874. memory).
Too many Remove user-installed applications on the FR6874 to recover
applications memory. Select
installed on the
Programs
FR6874.
The FR6874's Recharge the battery.
battery is low.
The internal Because this mode requires battery power, power it off when not
Bluetooth radio is needed.
powered on for a
long time.
Maintenance & Troubleshooting
Solution
icon. Select the
Power
> >
Start Settings System
icon. Select the unused program and tap Remove.
100
> > tab
Start Settings System
tab and change
Advanced
tab and tap the
Remove