Internet Camera’s back panel and attach it to the network. If you connect this camera directly to a PC, the DCS-950 has an MDI/X port that will allow you to use either a straight through (included) or cross- over cable.
Page 3
Installing the Installation Wizard Insert the DCS-950 CD into the CD-ROM drive. Click on Install Software. Click on Installation Wizard. Click Next.
Page 8
Configuring Your Camera with the Setup Wizard To run the Setup Wizard, click on Start->Programs->DCS-950 Series Setup Wizard. Your camera’s IP Address will be displayed here. Click the Wizard button to begin. By default, the Admin ID and Password are “admin” (lower case).
Page 9
Configuring Your Camera with the Setup Wizard (continued) If you need to make any changes, click Back to modify your camera settings. Otherwise, click Restart to save and apply your settings. This may take a few minutes. Click Restart. Wait until the Link LED on the camera begins to flash.
After you click the Link button, the Installation Wizard will automatically open your Web browser to the IP address of the DCS-950 and prompt you for a user name and password. Enter “admin” into both fields. If you changed the user name and password in the setup wizard, enter the new values and click Apply.
Page 12
T T T T T echni You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product.