Display Assembly - HP 14s Maintenance And Service Manual

Display assembly

Description
Display bezel
For use in black models
For use in white models
For use in blue models
Display cable (includes display panel cable and camera/microphone cable)
Camera/microphone module
HD camera
VGA camera
Antenna, dual (includes wireless antenna cable and transceiver)
Raw display panel (35.6-cm [14.0-in])
UWVA, Brightview
UWVA, anti glare
SVA, Brightview
SVA, anti glare
Hinge Kit (left and right)
Display enclosure:(does not include wireless antennas)
For use in black models
For use in white models
For use in blue models
This section describes removing the display assembly and disassembling display subcomponents. You must
remove the display from the computer to disassemble display subcomponents.
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the fan assembly (see
To remove the display assembly:
1. Disconnect the display panel cable from the system board (1).
2. Disconnect the wireless antennas from the WLAN module (2).
56 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 34).
Fan on page 42).
32).
Spare part number
929635-001
929636-001
L00444-001
929637-001
919471-002
919472-002
929632-001
847660-008
821816-005
847664-008
916357-004
929640-001
929633-001
929634-001
L00445-001