View Connected Devices - NETGEAR Nighthawk X6 User Manual

Note For you to use this feature, the 2.4 GHz and 5 GHz networks must use the same
SSID and password.
7. To disable the Smart Connect feature, select the No radio button.
If you disable this feature, you can set a new SSID and password for the extender's 2.4 GHz and 5 GHz
networks in the Network Name (SSID) and WiFi Password fields on this page.
8. Click the SAVE button.
Your settings are saved.

View Connected Devices

You can view a list of devices that are connected to the extender network.
To view connected devices:
1. Launch a web browser from a computer or mobile device that is connected to your extender network.
2. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter www.mywifiext.net in the address field of
the browser.
• If you enabled the One WiFi Name feature, enter one of the following URLs:
- Windows-based computers. http://mywifiext or http://mywifiext.local
- Mac computers, iOS devices, and Linux devices. http://mywifiext. local
- Android devices. http://<extender's IP address> (for example, http://192.168.1.3)
For more information about how to find your extender's IP address, see
Address
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4.
If your browser displays the Menu icon
The extender menu displays.
5. Select Settings > Connected Devices.
The Connected Devices page displays. The devices connected to the extender displays on the page.
Nighthawk X6 AC2200 Tri-Band WiFi Range Extender
on page 49.
Extender Network Settings
, click it.
22
Find the Extender's IP