Table of Contents
Advertisement
Firepower 7000 Series Devices
Table 2-19
LED
Left (activity)
Right (link)
The power supply modules are located on the rear of the appliance. The following table describes the
LED associated with the power supply.
Table 2-20
LED
Off
Red
Blinking red
Blinking green
Green
Firepower 7110 and 7120 Physical and Environmental Parameters
The following table describes the physical attributes and the environmental parameters for the appliance.
Table 2-21
Firepower 7110 and 7120 Physical and Environmental Parameters
Parameter
Form factor
Dimensions (D x W x H)
Weight
maximum installed
Copper 1000BASE-T
Fiber 1000BASE-SX
Firepower 7000 Series Hardware Installation Guide
2 -12
Firepower 7110 and 7120 Management Interface LEDs
Description
Indicates activity on the port:
•
A blinking light indicates activity.
•
No light indicates there is no activity.
Indicates whether the link is up:
A light indicates the link is up.
•
No light indicates there is no link.
•
Firepower 7110 and 7120 Power Supply LED
Description
The power cord is not plugged in.
No power supplied to this module.
or
A power supply critical event, such as module failure, a blown fuse, or a fan
failure; the power supply shuts down.
A power supply warning event, such as high temperature or a slow fan; the
power supply continues to operate.
AC input is present; volts on standby, the power supply is switched off.
The power supply is plugged in and on.
Description
1U
21.6 in. x 19.0 in. x 1.73 in. (54.9 cm x 48.3 cm x 4.4 cm)
27.5 lbs (12.5 kg)
Gigabit copper Ethernet bypass-capable interfaces in a paired configuration
Cable and distance: Cat5E at 50 m
Fiber bypass-capable interfaces with LC connectors
Cable and distance: SX is multimode fiber (850 nm) at 550 m (standard)
Chapter 2
Hardware Specifications
Advertisement
Table of Contents
