Table of Contents
Advertisement
24
www.aeg.com
Problem
Drying cycle too
short.
Drying cycle too
6)
long
Steam program
does not start.
Unsatisfactory
drying result.
1) If there is an error message on the display (e.g. E51): Turn the tumble dryer off and on. Select a new
program. Push the Start/Pause button. If the appliance does not operate contact the service centre and
provide the error code.
2) Follow the program description — see PROGRAMS chapter
3) See chapter CARE AND CLEANING
4) Only dryers with Dryness Level option
5) See HINTS AND TIPS chapter
6) Note: After a maximum of 5 hours the drying cycle ends automatically.
7) Follow the steam program description.
13. TECHNICAL DATA
Height x Width x Depth
Possible cause
1)
Load size is small.
The laundry is too dry.
The filter is clogged.
The load is too large.
The laundry was not spun suffi-
ciently.
Too low or too high room temper-
ature - this is not the appliance
malfunction.
There is no water in the container
for the steam system. Indicator is
on.
Steam load too low.
Incorrect program selection.
Incorrect load/type of the cloths.
Select time program. The time val-
ue must be related to the load. To
dry 1 item or a small amount of
laundry we recommend short dry-
ing times.
Select time program or higher dry-
ness level (e.g.
Clean the filter.
Do not exceed the maximum load
size.
Spin the laundry well.
Ensure a room temperature higher
than +5°C and lower than +35°C.
Optimal room temperature to ach-
ieve best drying results is between
19°-24°C.
Steam function
Fill the container with the distilled
or demineralized water.
Extend the steam load.
Do the selection of the applicable
program.
Use applicable load/type of
clothes.
850 x 600 x 600 mm (maximal 665 mm)
Remedy
extra dry )
7)
Advertisement
Table of Contents
