Table of Contents
Advertisement
SERIES 3000 MKIII TECHNICAL MANUAL
MAN0917_Issue 6_08/2015
Inhibit icon (
)
The inhibit icon displayed when in the configure inhibit, bump test and force current menu modes.
Warning / Fault icon (
)
The warning / fault icon is displayed if a warning or fault is detected and if a zero or span calibration fails.
Test Pass icon ( )
The test pass icon is displayed after a successful zero / span calibration. In monitoring mode it flashes
every second indicating that no warnings / faults are detected and that the unit is functioning properly.
Diagram 12: Gas Type and Formula displays
24
Advertisement
Table of Contents
