Factory Default Settings; Technical Specifications - NETGEAR EX6100v2 User Manual

Factory Default Settings

The following table includes the factory settings for the extender. You can use the Factory
Reset button or by logging in and clicking a RESET button to return the extender to these
settings. (See Return the Extender to Its Factory Settings
Table 2. Factory default settings
Feature
Setup Wizard
WiFi communication
WiFi network names (SSIDs)
Security
Transmission speed
Country/region
Operating mode
Data rate
DHCP
1. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.

Technical Specifications

The following table includes the product specifications.
Table 3. Technical specifications
Feature
Network protocol and standards
compatibility
Power consumption
Physical specifications
AC750 WiFi Range Extender
Setting
Enabled
Enabled
NETGEAR_EXT
Disabled
1
Auto
Varies by region
802.11a/b/g/n/ac
Up to 300 Mbps for 2.4 GHz network and 433 Mbps for 5 GHz network
Client enabled
Description
Data and routing protocols: TCP/IP, DHCP server and client, DNS relay
100–240V, 50/60 Hz, 0.16A maximum
• Dimensions: 122 x 74 x 38 mm (4.8 x 2.9 x 1.5 in.)
• Weight: 213 g (8.15 oz)
Supplemental Information
48
on page 40.)