Table of Contents
Advertisement
1. Activate the appliance.
2. Set a heating function.
3. Press
display shows: Duration.
4. Set the time.
5. Press
display shows: Set + Go.
6. Press
Press any symbol (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
• Function Lock is on when
• The menu: Basic Settings
10.5 Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some
time if a heating function operates and
you do not change any settings.
Temperature (°C)
30 - 115
120 - 195
11. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.
again and again until the
again and again until the
to confirm.
the heating function
operates.
lets you activate and
deactivate the function:
Set + Go.
Switch-off time (h)
12.5
8.5
Temperature (°C)
200 - 230
) to start
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a symbol during the
– if the appliance is deactivated and
10.7 Cooling fan
When the appliance operates, the
cooling fan activates automatically to
keep the surfaces of the appliance cool.
If you deactivate the appliance, the
cooling fan can continue to operate until
the appliance cools down.
11.1 Cooking with steam
• Use only heat and corrosion resistant
cookware or chrome steel food
containers (for some models only).
• The correct shelf positions are in the
table below. Count the shelf positions
from the bottom to the top.
• When you cook longer than 30
minutes or when you cook large
quantities of food, add water if it is
necessary.
• Put the food into the correct cooking
containers and put the containers on
Switch-off time (h)
5.5
The Automatic switch-off
does not work with the
functions: Light, End Time,
Duration.
night brightness (apart from ON /
OFF), the display goes back to
the day brightness mode for the
next 10 seconds.
you set the function: Minute
Minder. When the function ends,
the display goes back to the night
brightness.
ENGLISH
15
Advertisement
Table of Contents
