Epson SF-510 User Manual page 92

Measurement
Average Pitch
Lap Pitch
HR
Average HR
Maximum HR
Lap HR
Steps
Lap Steps
HR Zone Time
Time to HR Zone
1 5
Total Ascent
1 5
Total Descent
1 5
Grade
3
Latitude/Longitude
4
Estimated Time
Estimated Distance
1 Altitude, Total Ascent, Total Descent, and Grade are calculated using the GPS signal. These functions may be less accurate
than the position and distance tracking depending on the GPS environment.
2 Set the Target Pace in the Measure set. menu.
See "Setting a pace" on page 45.
3 When 3 Lines is selected as the Screen Display setting, Latitude/Longitude are only available on Line 2.
4 Use these settings when the Mode option located in the Measure set. menu is set to Goal.
See "Measure set. options" on page 81.
5 Only available on the SF-710.
Settings
Display name
1 line 2 lines/3 lines
Avg.Pitch Av.Pitch
LapPitch LapPitch
HR HR
Avg.HR Av.HR
Max.HR Max.HR
LapHR LapHR
Steps Steps
LapSteps LapStp
Spent.HR Spent.HR
Time.HR Time.HR
TotalAscent Tot.Asc.
TotalDesent Tot.Des.
Grade Grade
LAT/LONG LAT/LONG
Est.Time Est.
Est.Dist. Est.Dist.
91
Description
Average pitch from the start of
measurements
Average pitch for each lap
Current heart rate
Average heart rate from the start of
measurements
Maximum heart rate from the start of
measurements
Average heart rate for each lap
Number of steps from the start of
measurements
Number of steps for each lap
Time within heart rate zone for each lap
set by the Interval function
Time to reach the heart rate zone for each
lap set by the Interval function
Total ascent from the start of
measurements
Total descent from the start of
measurements
Current grade
Current latitude/longitude
Estimated time of arrival at the target
distance set in the goal function
Estimated distance reached at the target
time set in the goal function