SPECIFICATIONS [Input and Output connectors] BC-CSK/BC-CSKA battery charger Camera (USB)•A/V OUT terminal: Power requirements: AC 100 V to 240 V, 50/ [System] Video, Audio (Monaural), USB 60 Hz, 2.2 W (BC-CSK)/2.3 W (BC-CSKA) Image device: communication Output voltage: DC 4.2 V, 0.33 A (BC-CSK)/ 7.79 mm (1/2.3 type) color CCD, Primary USB communication: 0.30 A (BC-CSKA)
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.
Page 4
1. SERVICE NOTE 1-1. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.) Note: When replacing the camera, erase the data in internal memory of the board before replacement. Method for Copying the Data in Internal Memory Copy Copies all images in the internal memory to “Memory Stick Duo”...
Page 5
2. DISASSEMBLY The following flow chart shows the disassembly procedure. 2-1. DISASSEMBLY 1 SCREW_TP_1.7_3.7_A0.4_D3_N 1 SCREW_TP_1.7_3.7_A0.4_D3_N 2 MIDDLE BELT (L) 2 CABINET (REAR) ASSY 3 SCREW_TP_1.7_3.7_A0.4_D3_N 4 MIDDLE BELT (R) (To page 2-2) 1 LCD 1 SCREW_TP_1.4_3_A_0.2_D=2.5 2 SCREW_TP_1.4_3_A_0.2_D=2.5 2 JACK COVER ASSY 3 SCREW TP 1.4 ∗...
Page 6
(From page 2-1) 1 SCREW_TP_1.4_3_A_0.2_D=2.5 1 SCREW_TP_1.4_3.5_A0.3_D2.5_N 1 SCREW_TP_1.4_3.5_A0.3_D2.5_N 2 CABINET (UPPER) ASSY 2 MAIN BOARD 2 LENS BLOCK ASSY 3 SCREW_TP_1.4_3_A_0.2_D=2.5 3 MAIN FRAME SUB ASSY 4 ST BLOCK ASSY Note: High-voltage cautions Discharging the Capacitor Short-circuit between two points with the short jig about 10 seconds.
Page 7
HELP Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown. HELP01 Be careful about the Lens Assy Don't press the Barrier part. Don't press the Sensor holder Be careful of the weld Don't press the AF motor HELP02 Keep clean these Pins.
4. REPAIR PARTS LIST NOTE: • -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number, the original one. please include the board name. • Items marked “*” are not stocked since they are seldom required for routine service.
4-1. EXPLODED VIEWS 4-1-1. OVERALL SECTION Main Frame Section (See page 4-3) Ref. No. Part No. Description Ref. No. Part No. Description X-2345-955-1 CABINET (FRONT) ASSY (S) (SILVER) 4-136-408-01 BELT (L), MIDDLE X-2345-956-1 CABINET (FRONT) ASSY (B) (BLACK) X-2345-941-1 COVER ASSY (S), JACK (SILVER) X-2345-957-1 CABINET (FRONT) ASSY (P) (PINK) X-2345-958-1 CABINET (UPPER) ASSY X-2345-942-1 COVER ASSY (B), JACK (BLACK)
Page 11
Lens Section (See page 4-4) Note 1: In case of the main board failure, contact your local Sony service Headquarter for the measures. Note 2: The adjustment is not required after replacing these parts. • Refer to page 4-1 for mark 0.
4-1-3. LENS SECTION ns: not supplied (CCD Assy) (Note) Note: In case of the CCD assy failure, contact your local Sony service Headquarter for the measures. Ref. No. Part No. Description Ref. No. Part No. Description A-1701-284-A LENS BLOCK ASSY...
4-2. ACCESSORIES Checking supplied accessories. Note: This item is supplied with the unit as an accessory, but is not prepared as a service part. Power Cord Conversion (2P) Adaptor Battery Charger Battery Charger 0 1-832-169-41 (UK) 0 1-569-008-12 (E: NTSC) BC-CSK/BC-CSKA BC-CSK/BC-CSKA 0 1-833-892-41 (KR)
Page 14
[Regarding Fuse] • MAIN BOARD Ref. No.: Part No.: 1-576-363-11 Description: FUSE, MICRO (1005 TYPE) (1A/30V) Ref. No.: Part No.: 1-576-913-11 Description: FUSE, MICRO (1608 TYPE) (1.6A/36V) DSC-S980...