Server Network Settings; Device Name; Magicinfo Mode - Samsung DB32D User Manual

Server Network Settings

MENUm → →
Network Server Network Settings
Connect to server
Server Network
Player
To run connect to a network.
SSL option is enabled, the server is configured to use https and data transfer is encrypted.
• If the
― Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to the
server using port number 7001, check with your server administrator to find the correct port number
and then change the port number.)

MagicInfo Mode

MagicInfo Mode
Select the appropriate depending on the environment where you are using the
product.
MagicInfo
•
→ ENTERE
Server Access
Select a method to connect the server network.
Allow / Deny
•
FTP Mode
Specify the FTP operating mode.
Active / Passive
•

Device Name

MENUm → → → ENTERE
Network Device Name
Select or enter a device name.
This name can be shown on network remote controls over the network.