Disassembly; Rear Cover Removal; Speaker Connector Disconnection; Chassis Removal And Refitting - Sony KV-28FQ86B Service Manual

2-1. Rear Cover Removal

=>
=>
=>
=>
Remove the rear cover fixing screws indicated and pull the
rear cover backwards away from the set. Take care when
removing the rear cover not to damage the speaker cable
[Disconnect the speaker connector] a speaker is fitted inside
the rear cover.

2-3. Chassis Removal and Refitting

To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.
SECTION 2 DISASSEMBLY

2-2. Speaker Connector Disconnection

Before completely removing the rear cover disconnect the
speaker connector which is located on the inside of the set.
When refitting the chassis ensure that the main bracket is
located in the beznet guide slots before sliding the chassis
forwards. Refit the inter-connecting leads in their respective
purse locks.
- 14 -