Sony KV-HA21N80 Operating Instructions Manual

Fd trinitron wega
Hide thumbs Also See for KV-HA21N80:

Advertisement

Quick Links

Trinitron Color TV
Operating Instructions
• Before operating the unit, please read this manual thoroughly and
retain it for future reference.
KV-HA21
KV-HA14
© 2002 Sony Corporation
4-086-776-11 (1)
GB
N80
N70

Advertisement

Table of Contents
loading

Summary of Contents for Sony KV-HA21N80

  • Page 1 4-086-776-11 (1) Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-HA21 KV-HA14 © 2002 Sony Corporation...
  • Page 2: Getting Started

    Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old batteries nor use different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •...
  • Page 3 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
  • Page 4 WARNING (continued) Do not plug in too many appliances to the same Do not place any objects on the TV. power socket. Do not damage the power cord. Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source Install the TV on a stable TV stand and floor (mains) as long as the power cord is plugged in.
  • Page 5 VIDEO IN Video input terminal. MONITOR OUT Monitor output terminal. * You can also use the VOLUME +/– buttons on the TV to work as the +/– buttons on the remote. The R (audio input) jacks are available for KV-HA21N80/HA14N80 only.
  • Page 6: Connecting Optional Components

    TV at the same time; otherwise the picture will not be displayed properly on the screen. Connecting to the monitor output terminal TV rear panel AUDIO VIDEO L(MONO) Audio/Video cable Audio system (not supplied) VIDEO MONITOR The R (audio input) jacks are available for KV-HA21N80/HA14N80 only.
  • Page 7: Troubleshooting

    TV. • Count the number of times the STANDBY indicator flashes. Press ! The STANDBY (main power) to turn off your TV. Contact your nearest Sony service indicator on your TV center. flashes red several times after every three seconds.
  • Page 8 Specifications KV-HA21N80 Note KV-HA14N80 KV-HA21N70 Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system Color system NTSC3.58, PAL*, PAL 60*, NTSC4.43* * AV IN only Channel coverage : 2 to 13...
  • Page 9 Set TV to turn on automatically. SLEEP Set TV to turn off automatically. – CABLE Select the cable TV. Sound mode operations (KV-HA21N80/HA14N80 only) SOUND MODE Select sound mode. SPACE SOUND Select space sound mode. Not function for your TV. –...
  • Page 10: Setting The Wake-Up Timer

    I Setting the timers You can turn on and off your TV by using the WAKE UP and SLEEP buttons respectively. Setting the Wake Up timer MUTING DISPLAY POWER POWER Press WAKE UP until the desired period of time VIDEO appears on the screen.
  • Page 11 J Presetting channels You can automatically preset cable TV, VHF or UHF broadcast channels, or manually preset the channels to receive new channels or channels with a weak signal. Presetting channels automatically MUTING DISPLAY POWER Press ! on the TV to turn on the TV. VIDEO Press CABLE to select “CABLE: ON”.
  • Page 12 Presetting channels (continued) To change the color system setting If the color is abnormal when receiving programs through the video input terminal. (1) Press SELECT until “COLOR SYS” appears on the screen. (2) Press + or – to select the appropriate color system until the color is optimal. AUTO NTSC3.58 NTSC4.43...
  • Page 13: Customizing The Picture And Sound

    To adjust other items, repeat steps 1 to 2. Notes • “BASS”, “TREBLE” and “BALANCE” can be adjusted for KV-HA21N80/HA14N80 only. • “HUE” can be adjusted for the NTSC color system only. • Reducing “SHARP” can also reduce picture noise.
  • Page 14 Customizing the picture and sound (continued) Selecting the space sound mode Press SPACE SOUND. Select “ON” listen to monaural sound with a stereo-like effect. “OFF” turn off space sound mode. Note • You can also turn space sound on or off using the SELECT and + or – buttons.

This manual is also suitable for:

Kv-ha21n70Kv-ha14n80Kv-ha21Kv-ha14

Table of Contents