Table of Contents
Advertisement
CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
Programme Selection and Operating the Machine
By pressing On/Off button(4), energise the machine. On/Off lamp lights as long as the machine is on.
Select the suitable programme by pressing Program button(5).
Press Start/Pause button (6) to start the program. Next, Wash lamp turns on and Remaining Time Indicator(7)
shows the program duration. It also indicates the remaining time during the program flow.
If you open the door of your machine while program is continuing, duration of program pauses,program number
and program duration are shown alternately.
Program flow can be monitored via Wash,Rinse Dry and End lamps on the Remaining Time Indicator(7). Machi-
ne remains silent for about 40-50 minutes when the drying lamp is on.
NOTE: By pressing half load button(3), three sorts of washing can be executed that are in both baskets, upper
basket and lower basket. Press until the lamp of basket contaning dishes to be washed is on. No dishes certa-
inly exist in the basket which will not be washed.
NOTE: Press Half load button for 3 seconds to activate Tablet option when using combined detergent that
contains salt, rinse aid and extra functions.
NOTE: You may select Hygiene in order to obtain hygienic and a cleaner washing process by altering the water
temperature and washing time of the program you have selected.
NOTE: If Rinse option is selected, washing-rinsing steps will be added into the selected program, so you can
ensure that your dishes will be extracted cleaner and glosser.
NOTE: If Drying lamp is on, extra heating and drying steps will be added into the selected program,so you can
ensure that your dishes will be extracted dryer.
NOTE: If you have used an extra feature on the latest washing program, this feature will remain active also on
the next washing program. If you want to cancel this feature on the newly selected washing program, press
Extra(1),Delay(2) or Half load button(3) until related lamps are off or turn the machine off with On/Off button(4).
If you would like to use extra feature with newly selected program, select the desired functions.
NOTE: Child lock is activated/deactivated by pressing both "Extra"(1) and "Half Load"(3) buttons for about 3
seconds. When it is activated, all leds blink and "CL" is shown on Remaining Time Indicator(7) once. When it is
deactivated, all lamps and "CL" blink twice.
NOTE: You can delay start time of the program for 1-2...19 hours by pressing delay button(2) before program
starts. If you want to change delay time,first press Start/Pause button and then delay button to select new delay
time. To activate new delay time, press Start/Pause button. To cancel the delay, you need to switch to 0 hour by
using the delay button.
NOTE: If user switches the machine to off position after selecting the delay time and the programme has star-
ted, delayed time is cancelled.
NOTE: When softening salt is not enough, salt lack warning indicator (9) turns on and you need to fill in the salt
chamber.
NOTE: When rinse aid is not enough, rinse aid lack warning indicator (9) turns on and
you need to fill in rinse aid chamber.
9
EN-22
Advertisement
Table of Contents
