Samsung 727264 Instructions

TELEPÍTÉS
Active holder for fixed installation - Samsung Galaxy Tab A7
Lite
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can
remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw
the attaching plate into place with the enclosed screws.
Place the holder over the attaching plate so the screw fits in
the hole in the tilt swivel. Tighten the screw until the holder
is firmly in place, but still can be adjusted.
3. To place the device in the holder: Slide the device
sideways into the holder until you hear / feel it snaps into
place. To remove the device from the holder: Slide the
device sideways and out.
4. The holder is in place.