A4 Product Information; Technical Support - GE Multilin 745 Instruction Manual

745
Transformer Management Relay
NOTE

Technical Support

6–16
Table 6–1: Types and Causes of Events (Continued)
ON/OFF events
Logic Input 1
Logic Input 4
Logic Input 7
Logic Input 10
Logic Input 13
Logic Input 16
Virtual Input 3
Virtual Input 6
Virtual Input 9
Virtual Input 12
Virtual Input 15
Output Relay 2
Output Relay 5
Output Relay 8
Virtual Output 2
Virtual Output 5
Setpoint Group 3
Simulation Disabled
Simulation Playback
Comm Port Reset
Control Power
Tap Changer failure
ERROR! events
Logic Input Power
EEPROM Memory
Int. Temperature
Bad Xfmr Settings
Ambnt temperature
The recorded event displayed for Logic inputs, Virtual Inputs, and Relay outputs will
show the programmed name of the input/output.

A4 Product Information

PATH: ACTUAL VALUES !" A4 PRODUCT INFO
! TECHNICAL
[!]
SUPPORT
MESSAGE
MESSAGE
MESSAGE
The manufacturer's contact information for technical support is shown here.
http://www.GEindustrial.com/multilin
Logic Input 2
Logic Input 5
Logic Input 8
Logic Input 11
Logic Input 14
Virtual Input 1
Virtual Input 4
Virtual Input 7
Virtual Input 10
Virtual Input 13
Virtual Input 16
Output Relay 3
Output Relay 6
Self-Test Relay
Virtual Output 3
Setpoint Group 1
Setpoint Group 4
Simulation Prefault
Logic Input Reset
Manual Trace Trigger
Aging factor Limit
Analog Output Power
Real-Time Clock
FlexLogic Equation
IRIG-B Signal
! TECHNICAL SUPPORT
GE Multilin
215 Anderson Avenue
Markham, Ontario,
Canada, L6E 1B3
Tel: (905) 294-6222
Fax: (905) 201-2098
Internet Address:
GEindustrial.com/pm
A4 Product Information
Logic Input 3
Logic Input 6
Logic Input 9
Logic Input 12
Logic Input 15
Virtual Input 2
Virtual Input 5
Virtual Input 8
Virtual Input 11
Virtual Input 14
Output Relay 1
Output Relay 4
Output Relay 7
Virtual Output 1
Virtual Output 4
Setpoint Group 2
Test Mode
Simulation Fault
Front Panel Reset
Auto Trace Trigger
Ambient Temperature
Unit Not Calibrated
Emulation Software
DSP Processor
Setpt Access Denied
GE Multilin