Overload Alarm - GE Multilin 369 Quick Start Manual

CHAPTER 4: KEYPAD SETPOINTS
4.4.3

Overload Alarm

369 MOTOR MANAGEMENT RELAY – QUICKSTART GUIDE
An overload alarm will occur only when the motor is running and the current rises above
the programmed
OVERLOAD ALARM LEVEL
An application of an unlatched overload alarm is to signal a PLC that controls the load on
the motor, whenever the motor is too heavily loaded.
FIGURE 4–4: RTD Bias Curve
. The overload alarm is disabled during a start.
S3 OVERLOAD PROTECTION
4–39