Download
Share
Print this page
Husqvarna LF 75 Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Vibratory rammers & tampers
  5. LF 75
  6. Operator's manual

Husqvarna LF 75 Operator's Manual

Hide thumbs

Advertisement

Quick Links

LF 75, LF 80, LF 100, LF 130
EN
Operator's manual
2-30

Advertisement

loading

Related Manuals for Husqvarna LF 75

Summary of Contents for Husqvarna LF 75

  • Page 1 LF 75, LF 80, LF 100, LF 130 Operator's manual 2-30...
  • Page 2 TO PURCHASE THIS PRODUCT PLEASE CONTACT US Equipment Financing and Extended Warranties Available Discount-Equipment.com is your online resource for commercial and industrial quality parts and equipment sales. 561-964-4949 visit us on line @ www.discount-equipment.com Select an option below to find your Equipment We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto, Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack, Lull,...

  • Page 3: Table Of Contents

    Contents Introduction..............2 Transportation, storage and disposal......17 Safety................6 Technical data.............. 20 Operation..............10 EC Declaration of Conformity........30 Maintenance..............13 Introduction California Proposition 65 WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
  • Page 4 Product overview LF 75, LF 80, LF 100 1. Water tank (LAT only) 8. V-belt cover 2. Water valve 9. Bottom plate 3. Lifting point 10. Transport wheels (LAT only) 4. Straps (optional) 11. Vibration damping units 5. Handle knobs 12.
  • Page 5 Product overview LF 130 1. Lifting point 7. Transport wheels 2. Straps 8. Vibration damping units 3. Handle knobs 9. Eccentric element 4. Upper handle 10. Bottom plate 5. Safety frame 11. Type plate 6. V-belt cover 12. Operator's manual 945 - 003 - 03.04.2020...
  • Page 6 Engine overview Honda Hatz 1. Muffler 2. Fuel tank Unleaded gasoline with a maximum of 10% 3. Fuel tank cap ethanol. 4. Spark plug 5. Air filter 6. Throttle control 7. Starter rope handle Ultra-low-sulfur diesel fuel only 8. Oil tank / dipstick 9.

  • Page 7: Safety

    7. Production year Product liability Do not attach the lifting equipment at this point. (LF 75) As referred to in the product liability laws, we are not liable for damages that our product causes if: Noise emission to the environment as referred to in the EC directive.
  • Page 8 • Do not operate the product unless you receive • Do not sit on the product. training before use. Make sure that all operators • Do not hit the product. receive training. • Always operate the product from behind with your •...
  • Page 9 Dust safety Noise safety WARNING: Read the warning instructions WARNING: Read the warning instructions that follow before you use the product. that follow before you use the product. • Operation of the product can cause dust in the air. • High noise levels and long-term exposure to noise Dust can cause serious injury and permanent health can cause noise-induced hearing loss.
  • Page 10 Do a check of the safety devices regularly. If the • Examine the vibration damping units for damages safety devices are defective, speak to your and wear. Husqvarna service agent. • Replace the vibration damping units if it is necessary. Engine ON/OFF switch (Honda)

  • Page 11: Operation

    Do the daily maintenance. Refer to schedule on page 13 . Water tank For LF 75, LF 80, LF 100 there is an optional water tank for compaction of asphalt. CAUTION: Do not add other fluids than water to the water tank. Other fluids can...
  • Page 12 2. Set the throttle control to ⅓ throttle. 8. Open the choke control gradually until it is fully open. 9. Let the engine operate at idle speed for 2–3 minutes. 3. Set the choke control in the correct position. 10. Set the throttle control to full throttle. a) If the engine is cold, close the choke.
  • Page 13 To stop the product (Hatz) 2. Pull the starter rope handle slowly until you feel resistance. • Set the throttle control to the stop position (A). 3. Release the starter rope handle to let the starter rope go back. 4. Pull the starter rope handle with two hands until the engine starts.

  • Page 14: Maintenance

    a) To turn the product with a minimum turning 2. Lift the handle (B). radius, lift the handle to a 90 degrees angle. Use 3. Tighten the handle knobs (A). this function in small spaces and on ground that To set the product in transport position is not level.
  • Page 15 General product maintenance Before use, Weekly, each 10 h each 100 h Make sure that there are no fuel or oil leaks. Clean the product. Make sure that nuts and screws are tightened. Examine the throttle control and choke control for damage. Make sure that the throttle control and the choke control can move smoothly.
  • Page 16 Engine maintenance, Hatz Before use, After the Yearly, each Each 250 h each 10 h first 20 h 500 h Clean the cooling fins of the engine. Clean the air filter. Replace the air filter. Replace the engine oil. Do a check of the engine speed. Clean the spark arrester screen on the muffler.
  • Page 17 To replace the engine oil (Hatz) 2. Remove the paper filter element and the foam filter element (A). If the engine is cold, start the engine for 1–2 minutes before you drain the engine oil. This makes the engine oil warm and easier to drain. WARNING: Engine oil is very hot directly after the engine stops.

  • Page 18: Transportation, Storage And Disposal

    2. Remove the air filter (A). 1. Stop the engine. 2. Remove the V-belt cover. 3. Clean the air filter housing with a brush. 4. Examine the air filter for damage. 5. Tap the air filter against a hard surface or use a vacuum cleaner to remove the particles.
  • Page 19 The type plate on the Note: The straps are standard equipment on product shows the product weight. model LF 130 but optional on models LF 75, LF 80, LF 100 To safety the product to a transportation...
  • Page 20 Discard all chemicals, such as engine oil or fuel, at a service center or at an applicable disposal location. • When the product is no longer in use, send it to a Husqvarna dealer or discard it at a recycling location. 945 - 003 - 03.04.2020...

  • Page 21: Technical Data

    * = For further information and questions about this specific engine, refer to the engine manual or the web site of the engine manufacturer. Noise and vibration emissions, LF 75 420 mm/16.5 in. width 500 mm/19.6 in. width Sound power level, measured dB (A)
  • Page 22 Noise and vibration emissions, LF 75 420 mm/16.5 in. width 500 mm/19.6 in. width Sound pressure level at the operator's ear, L , dB (A) Vibration level, a , m/s , standard handle/low vibration han- 6/1.2 6/1.2 Weights for options, LF 75 420 mm/16.5 in.
  • Page 23 LF 80 Max. tilt, degrees/% 20/36 Fuel tank capacity, l/qts 3.6/3.8 Engine oil capacity *, l/qts 0.6/0.63 Fuel consumption, l/h or qts/h 1.21 or 1.28 Water tank for asphalt, l/gal 13/3.4 Fuel * Unleaded gasoline, max. 10% ethanol Engine oil * SAE 10W-30, API Class SJ * = For further information and questions about this specific engine, refer to the engine manual or the web...
  • Page 24 Technical data, LF 100 LF 100 Honda Hatz Net weight, kg/lb L: 95.2/209.9 L: 104.8/231.0 LA: 96.3/212.3 LAT: 111/244.7 LAT: 102/224.9 Operation weight (EN500, incl. oil, ½ L: 96.6/212.9 L: 106.2/234.1 fuel), kg/lb LA: 102.8/226.6 LAT: 117.5/259 LAT: 94.5/208.3 Engine brand, type Honda, GX160 Hatz, 1B20 Engine power, kW/hp @rpm...
  • Page 25 Noise and vibration emissions, LF 100 Honda Hatz Sound pressure level at the operator's ear, L , dB (A) Vibration level, a , m/s , standard handle/low vibration handle 8/0.8 8/0.5 Weights for options, LF 100 Honda Hatz Protective frame, kg/lbs 3.9/8.6 4.7/10.4 Sprinkler system with protective frame, net weight, kg/lbs...
  • Page 26 LF 130 Honda Hatz Engine oil capacity *, l/qts 0.6/0.63 0.9/0.95 Fuel consumption, l/h or qts/h 1.21 or 1.28 0.57 or 0.6 Fuel * Unleaded gasoline, max. 10% etha- Ultra-low-sulfur diesel fuel only Engine oil * SAE 10W-30, API Class SJ SAE 10W-30, ACEA - B3/E4 Grease, eccentric element SKF LGAF 3E...
  • Page 27 Product dimensions LF 75 Length including handle, Length bottom plate, 1037/40.7 570/22.4 mm/in. mm/in. Length with handle folded, Handle height, mm/in. 1114/43.8 690/27.1 mm/in. 420/16.5 / Height, mm/in. 655/25.7 Width, mm/in. 500/19.6 Bottom plate contact area, 0.116/1.25 / /sq. ft.
  • Page 28 Product dimensions LF 80 Length including handle, Length bottom plate, 1037/40.7 570/22.4 mm/in. mm/in. Length with handle folded, Handle height, mm/in. 1114/43.8 680/26.7 mm/in. Height, mm/in. 655/25.7 Width, mm/in. 420/16.5 Bottom plate contact area, 0.116/1.25 /sq. ft. 945 - 003 - 03.04.2020...
  • Page 29 Product dimensions LF 100 Length including handle, Length with handle folded, 1020/40.2 765/30.1 mm/in. mm/in. Handle height, mm/in. 1005/39.6 Height, mm/in. 690/27.1 Bottom plate contact area, Height at lifting point on the 0.153/1.64 694/27.3 /sq. ft. safety frame, mm/in. Length bottom plate, 595/23.3 Width, mm/in.
  • Page 30 Product dimensions LF 130 Hatz Honda Pos. Hatz Honda Pos. Hatz Honda 1000/39. 1000/39. Length with handle fol- Handle height, mm/in. 682/26.9 675/26.6 ded, mm/in. Length including trans- Height, mm/in. 701/27.6 664/28.1 840/33.1 798/31.4 port wheels, mm/in. Bottom plate contact 0.143/1.

  • Page 31: Ec Declaration Of Conformity

    +46-36-146500, declare on our sole responsibility that the product: Description Forward Plate Compaction Machine Brand Husqvarna Type/Model LF 75, LF 80, LF 100, LF 130 Identification Serial numbers dating from 2019 and onwards complies fully with the following EU directives and regulations: Directive/Regulation Description 2014/30/EU "relating to electromagnetic compatibility"...
  • Page 32 TO PURCHASE THIS PRODUCT PLEASE CONTACT US Equipment Financing and Extended Warranties Available Discount-Equipment.com is your online resource for commercial and industrial quality parts and equipment sales. 561-964-4949 visit us on line @ www.discount-equipment.com Select an option below to find your Equipment We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto, Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack, Lull,...
  • Page 33 Original instructions 1140382-26 2020-04-06...

This manual is also suitable for:

Lf 80Lf 100Lf 130