Download Print this page

Honeywell NOTIFIER FSP-951-SELFT Installation And Maintenance Instructions page 4

Intelligent photoelectric self-test smoke sensor

Advertisement

SUPPLEMENTAL INFORMATION
For Limitations of Fire Alarm Systems,
please go to:
http://www.systemsensor.com/
en-us/Documents/I56-1558.pdf
Limitations of
Fire Alarm Systems
Notifier
®
and FlashScan
®
are registered trademarks of Honeywell International, Inc.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
WARNING: Do not make changes to the equipment. Changes or modifications not expressly approved
by the manufacturer could void the user's authority to operate the equipment.
4
DEVICE AND SYSTEM SECURITY
Before installing this product ensure that the
tamper seal on the packaging is present and
unbroken and the product has not been tampered
with since leaving the factory. Do not install this
product if there are any indications of tampering.
If there are any signs of tampering the product
should be returned to the point of purchase.
It is the responsibility of the system owner to
ensure that all system components, i.e. devices,
panels, wiring etc., are adequately protected to
avoid tampering of the system that could result
in information disclosure, spoofing, and integrity
violation.
I56-6782-000
©2021 Notifier. 1/6/2021

Advertisement

loading

This manual is also suitable for:

Notifier fsp-