Chapter 3
Customization
Update the Switch IP Information
Figure 3-10
EtherChannels Window
Update the Switch IP Information
The Express Setup network settings enable the switch to operate with its standard
default settings and to be managed through the device manager. Existing settings
were set during initial setup. You would need to change these settings if you want
to move the switch to a different management VLAN or to a different network.
Use the Express Setup window
(Figure
3-11) to update the switch IP information.
To display this window, choose Configure > Express Setup from the device
manager menu. See the device manager online help for additional guidelines and
procedures.
User Guide for the Catalyst Express 500 Switches
3-21
OL-8122-01