Cisco 1841 User Manual page 8

Cisco 1841 and Cisco 2801 Routers
Table 5
Compact Flash
PVDM1
PVDM0
AIM1
AIM0
Table 6
Table 6
Name
Duplex
Speed
Link
The physical interfaces are separated into the logical interfaces from FIPS 140-2 as described in the
Table 7:
Table 7
Router Physical Interface
10/100 Ethernet LAN Ports
HWIC/WIC/VIC Ports
Console Port
Auxiliary Port
Cisco 1841 Integrated Services Router with AIM-VPN/BPII-Plus and Cisco 2801 Integrated Services Router with AIM-VPN/EPII-Plus
8
Cisco 2801 Front Panel Indicators (Continued)
Solid Green
Off
Solid Green
Solid Orange
Off
Solid Green
Solid Orange
Off
Solid Green
Solid Orange
Off
Solid Green
Solid Orange
Off
describes the meaning of Ethernet LEDs on the front panel:
Cisco 2801 Ethernet Indicators
State
Solid Green
Off
Solid Green
Off
Solid Green
Off
Cisco 2801 FIPS 140-2 Logical Interfaces
Indicates that the flash is busy and should not be removed.
OK to remove flash card.
PVDM1 installed and initialized.
PVDM1 installed and initialized error.
PVDM1 not installed.
PVDM0 installed and initialized.
PVDM0 installed and initialized error.
PVDM0 not installed.
AIM1 installed and initialized.
AIM1 installed and initialized error.
AIM1 not installed.
AIM0 installed and initialized.
AIM0 installed and initialized error.
AIM0 not installed.
Description
Full-Duplex
Half-Duplex
100 Mbps
10 Mbps
Ethernet link is established
No link established
FIPS 140-2 Logical Interface
Data Input Interface
OL-8719-01