Rpf(I)-(1.0-2.5)Fsn2E - Floor And Floor Concealed Type; Removal Of The Air Inlet Grille; Removal Of The Air Filter; Removal Of The Air Outlet Grille - Hitachi RCI-1.0FSR Service Manual

7 Servicing
RPF(I)-(1.0-2.5)FSN2E - Floor and Floor concealed type

7.8 RPF(I)-(1.0-2.5)FSN2E - Floor and Floor concealed type

7.8.1 Removal of the air inlet grille

RPF-(1.0-2.5)FSN2E
1 Loosen the screws on the securing plate of the right part of the
grille then remove the plates.
2 Press the button on both sides of the grille in the direction
indicated by the arrow. The grille can be opened at a 30° angle.
3 Remove the air inlet grille from the hinges.

7.8.2 Removal of the air filter

RPF-(1.0-2.5)FSN2E
The air filter is located inside the air inlet grille.
1 Remove the air inlet grilles as indicated in section "7.8.1 Removal
of the air inlet grille".
2 Remove the filter by pulling the filter button.

7.8.3 Removal of the air outlet grille

RPF-(1.0-2.5)FSN2E
1 Remove the screw holding the securing plate.
2 Open the upper panel so that it is vertical.
3 Slide and remove the air outlet grille.
267 SMGB0137 rev.0 - 05/2021
Knob
Air filter
Fixing plate
Discharge air
grille
7
Top panel