Philips S7000 Series Manual page 13

Problem
The appliance does
not shave as well as it
used to.
Water is leaking from
the bottom of the
appliance.
Philips Quick Clean Pod
Problem
My shaver isn't clean
after using the Philips
Quick Clean Pod.
00.049.0086.2 APA SDFU/IIB Bklt A6 FC 30x30 China.indd 13 00.049.0086.2 APA SDFU/IIB Bklt A6 FC 30x30 China.indd 13
Possible cause
The shaving unit is
soiled or damaged to
such an extent that
the motor cannot run.
The shaving heads
are damaged or
worn.
Hairs or dirt obstruct
the shaving heads.
During cleaning,
water may collect
between the inner
body and the outer
shell of the appliance.
Possible cause
You removed the
shaver before the
cleaning program
was finished.
The Philips Quick
Clean Pod Cartridge
needs to be replaced.
The Philips Quick
Clean Pod is tilted.
English
Solution
Clean the shaving
heads thoroughly or
replace them.
Replace the shaving
heads.
Clean the shaving
heads thoroughly.
This is normal and
not dangerous
because all
electronics are
enclosed in a sealed
power unit inside the
appliance.
Solution
Leave the shaver
in the Philips Quick
Clean Pod for
the full cleaning
program. Each
cleaning program
takes approximately
1 minute. The cleaning
icon goes out when
the cleaning program
is finished.
Replace the Philips
Quick Clean Pod
Cartridge.
Place the Philips
Quick Clean Pod on a
flat surface.
13
07-08-20 09:55 07-08-20 09:55