PCM-D10
2-6.
REAR CABINET BLOCK
1 Open the lid (battery).
3 two screws (M1.4)
(L = 3.0 mm)
top side
6 Insert the jig into the space
and slowly remove the rear
cabinet block.
Note: When using a jig, please
work carefully so as not
to damage the rear cabinet
and front cabinet.
5 Insert a flat-head screwdriver into
the two slits on the top of the unit,
and open a gap between the rear
cabinet and front cabinet.
8 five claws
8 claw
28
2 four screws
(Z1.7
4.5)
bottom side
front side
7 While moving the jig in
the direction of the arrow,
remove all claws and
the rear cabinet block.
two slits
8 three claws
8 three claws
8 claw
8 claw
9 Peel the rear cabinet block off
of the adhesive sheet (XLR).
JIG
When disassembling the unit, use the following jig.
Part No.
Description
9-913-402-33
TOOL FOR DISASSEMBLING
4 Close the lid (battery).
front cabinet
6 Insert the jig into the space
and slowly remove the rear
cabinet block.
Note: When using a jig, please
work carefully so as not
to damage the rear cabinet
and front cabinet.
0 rear cabinet block
guide line
adhesive
sheet
(XLR)
top side
NFC antenna
Sony CONFIDENTIAL
For Authorized Servicer
rear cabinet
7 While moving the jig in
the direction of the arrow,
remove all claws and
the rear cabinet block.
guide line
adhesive
sheet
(XLR)
SYS SET