AEG DVD 4603 HC Instruction Manual & Guarantee page 38

Locating a specifi c time
You can move to a specifi c location by entering its corre-
sponding time (hours, minutes, seconds)
1. Press the GOTO button.
2. Press or button to highlight time.
DVD
CD
3. Press the corresponding number buttons for the
setting point you want.
• The fi rst two numbers you entered represent
hours.
• The second two numbers you entered represent
minutes.
• The third two numbers you entered represent
seconds.
4. Press the ENTER button to confi rm. The unit will
start playback about 3 seconds later.
Notes :
• Some discs may not respond to this process.
• Some scenes may not be located as precisely as you
specifi ed.
• This method for accessing specifi c locations is avai-
lable only within the current title of the DVD disc.
• You can move through the menu by pressing the
and buttons.
Angle setting
1. Press the DISPLAY button twice on the remote unit.
The FUNCTION menu is displayed on the screen and
you can see how many angles are recorded on the
disc.
2. Press the ANGLE button repeatedly to select your
desired angle.
3. The unit will change to your desired angle about
3 seconds later.
4. Press the DISPLAY button on the remote unit to
resume the normal screen.
38
5....-05-DVD 4603 HC AEG_GB 38
Audio setting
1. Press the DISPLAY button twice on the remote unit.
The FUNCTION menu is displayed on the screen and
you can see how many audio formats are recorded
on the disc.
2. Press the AUDIO button repeatedly to select your
desired type of audio.
3. The unit will change to your selected type of audio
about 3 seconds later.
4. Press the DISPLAY button on the remote unit to
resume the normal screen.
Subtitle setting
1. Press the DISPLAY button twice on the remote unit.
The FUNCTION menu is displayed on the screen and
you can see how many subtitle formats are recorded
on the disc.
2. Press the SUBTITLE button repeatedly to select your
desired language.
3. The unit will change to your desired language about
3 seconds later.
4. Press the DISPLAY button on the remote unit to
resume the normal screen.
16.04.2004, 9:22:37 Uhr