Child Protection/Password (Pin Code); Factory Defaults; Changing Time Settings; Operation - AEG DVB-S 4540 Instruction Manual

AEG_BDA_DVB_S4540_GB_k.qxd:CL_BDA_DVB_T776_GB_ka.qxd
Child Protection/Password
(PIN code)
In the "Password", you can carry out the following
settings:
• the "Menu Lock",
• set the "channel lock" (child lock),
• set the "censorship lock",
• changing the password.
Menu Lock
In this menu you can set whether the password has
to be entered in order to call up the SETUP menu.
Child Lock
In the "TV/TV List" menu (see page 43) you can
block individual channels. With the "channel lock"
function you can switch this lock on and off.
If you would like to switch on the child lock, select
the "on" option.
If you would like to switch off the child lock, select
the "off" option.
Censorship Lock
In this menu you can choose between:
• "No block"
• "Total block" = all channels and some menu
options can only be released after the password
has been entered.
• „2" to „18" = Here you can determine the desired
age rating. This function must be supported by
the channel, which must transmit appropriate
data.
Changing the password
You may change the password (PIN code) set in the
factory and enter any other four-digit number as
your personal PIN code. The password "6666" has
been pre-programmed in the factory.
Note your new password; once changed, only
the new code is valid for all password queries.
If you've forgotten your personal password, you
can assign a new password by means of the
master password "1307".
Enter the old password (PIN) using the numercal
keys.
Enter the new password using the numercal keys.
Enter the new password again.
The information window "PIN code changed"
appears.
Press the 'OK' key to confirm.
The new password is integrated.
42
02.09.2009

Factory defaults

The receiver is reset to its condition on delivery.
All of your settings and stored data are deleted.
Select the "Set Default" submenu in the
"SETUP" menu by using the "M CH-" and
"L CH+" arrow buttons.
Press the 'OK' key to confirm.
You will be prompted to confirm your selection.
Press the "OK" button if you would like to return
the receiver back to the factory settings.
Press the "EXIT" button if you would like to exit
the menu.
Wait until the receiver re-starts.
This process may take a few minutes.
The installation menu then appears.
Press the "EXIT" key to return to the TV channel.

Changing time settings

In the "SETUP/Installation/General Settings" menu
you can determine the "time zone". Adjust the
"time zone" relative to the main time zone (GMT)
according to where you live.
The "time zone" can only be set if the
"Off" option in the "Auto time zone" menu is
selected.

Operation

Basic operating steps

Switching between radio and TV mode
To switch between radio mode and TV mode,
press the "TV/RADIO" key.
Selecting channel
To change to the previous or next channel press
the "M CH-" and "L CH+" arrow keys or the
"L CHANNEL M" keys at the receiver.
You may also switch directly to a station by ente-
ring the memory space number of the station
using the numerical keys.
Volume
To increase or reduce the volume, press the volu-
me keys " VOL+" and "
To switch the sound off at the receiver, press the
"MUTE" key.

User interface on the TV screen

You may carry out individual settings on your recei-
ver via the user interface menus. To display the user
interface, you must switch on the receiver and the
TV set. The user interface is comprised of the main
menu and its sub-menus.
16:05 Uhr Seite 42
VOL-".