Vcd Playback - AEG DVD 4620 HC Instruction Manual

English
44

VCD Playback

■
Press A-B (13) to mark start and end point of a video section to be
played repeatedly. Press once at the start and again at the end of
the section. Press A-B (13) again to cancel this repeat mode.
■
Press REPEAT (14) to select a chapter or title to be played repeat-
edly. Press REPEAT (14) again to cancel repeat mode.
■
Press ZOOM (12) to zoom in or out of the picture in several steps
(press repeatedly). Use the navigation buttons (8) to pan the
enlarged image.
■
Press HDMI (9) to directly access the HDMI settings.
NOTE
►
This is only possible after connecting the unit via the HDMI port
(21) to the TV set.
■
Press ANGLE (27) during DVD playback to select the desired camera
angle. This function is only available for DVDs with scenes shot from
different camera angles.
■
Press USB (30) to select between disc and USB modes (overview of
the components (12)).
PLEASE NOTE
►
If, after pressing a button, the
responding function is not available.
►
The unit automatically turns off 30 minutes after a DVD has
ended if you made no further inputs during this period.
‹
Press (1) on the unit or POWER on the remote control to turn
the unit on.
‹
Turn your TV set on.
The display (3) shows HELLO, LOAD and NO DISC, the TV set shows the
DVD 4620 HC welcome screen.
‹
Press / SCAN (4) on the unit or
remote control to open the tray.
‹
Insert a VCD with the label up.
‹
Close the tray again (press (4) or (19) again).
VCD playback starts automatically.
■
Press PLAY/PAUSE (16) to pause VCD playback, press again to
continue.
■
Press  STOP (15) to stop playback, press
start VCD playback again.
■
Press MENU/PBC (3) to access the interactive VCD menu (if available
on the VCD).
■
Press REPEAT (14) to select if a track or the entire VCD is to be
repeated. Press REPEAT (14) again to cancel repeat mode. This func-
tion is not available in activated PBC mode (button (3)).
Ø icon is displayed, then the cor-
OPEN/CLOSE (19) on the
PLAY/PAUSE (16) to