General Guide - Casio Cassiopeia IT-2000 User Manual

General Guide

Left
1 Charger connector
2 Charge indicator
3 Buzzer
4 Light sensor
5 LCD/Touch panel
6 Key pad
7 Power switch
8 RS-232C Interface
Connector
9 Stylus
10 Infrared interface
E-8
Front
3
4
5
1
2
Fn 7
6
4
0 1
For connection of the charger to charge the lithium ion battery pack.
Protected by a cover that must be opened for connection.
Stays lit while the lithium ion battery pack is being charged, and goes
out after charging is complete. Lights momentarily when the charger
is connected even when the battery pack is charged.
Emits audible signals to confirm certain operations. Make sure that
buzzer holes are not blocked so signals can be heard.
Detects available light. This information is used to control the
backlight when the Data Collector is set up to automatically turn on
the backlight under low lighting conditions. For proper operation,
make sure this sensor is not blocked.
Display data during program execution and other operations. Also
provides touch panel keys for input by touching the screen with a
finger or the stylus that comes with the Data Collector.
10-key pad, execute key, and other keys.
Press to turn power on and off, or to restore power after operation of
auto power off.
For connection of a bar code reader or other external device.
Protected by a cover that must be opened for connection.
For touch panel operation.
Communication port for data exchange with the Optical
Communication Unit when exchanging data between two Data
Collectors.
7
10
8 9
5 6 CLR
2 3
Right
8
9