Casio YC-400 User Manual page 116

PJ Camera Software Operating Environment
Auto scanning automatically detects when the document on the document stage stops
moving and records its image. Even if you are still holding the document, auto scanning
will record its image if it detects that it has stopped moving. If auto scanning
automatically records the document before you are ready, remove the document and then
replace it onto the document stage to re-record it.
Writing or other marks on the document stage can interfere with proper document
detection. Never write on the document stage and take care to guard against scratching
or otherwise damaging it.
[Manual]
With this setting, you need to perform a shutter release operation manually, and record the
image (document camera image) of the document on the PJ Camera Stand.
Configuring This Setting
Click [Auto] or [Manual]. This turns on (
option.
I Default Rotation
Use this setting to specify the default direction for auto rotation during image file recording.
This setting makes it possible to configure PJ Camera Software to produce images that are
oriented differently from the orientation of the documents placed on the PJ Camera Stand.
To do this:
Turn off image rotation
Rotate the image 90 degrees right
Rotate the image 90 degrees left
Rotate the image 180 degrees
Configuring This Setting
Click the option you want to select. This turns on (
the other options.
) the clicked option and turns off (
Select this option:
None
90 degrees right
90 degrees left
180 degrees
) the clicked option and turns off (
116
) the other
)