Basic Settings - NEC DT820 Quick Reference Manual

6. Answer - Press this key to answer an incoming call.
7. Mic - Press key to mute the microphone. The LED on this key
flashes when the microphone is muted. Press the key again
to un-mute the microphone.
8. Menu - Accesses user settings and information local to the
phone.
9. Cursor Pad - Use this key to access various features with
simple operation.
• Redial - Pressing this key re-dials the last number dialed.
• Directory - Pressing this key opens Personal Directory
menu.
d b
• Up/ Down: Used to adjust ringer volume and call vol-
ume.
• Handset, Headset and Speaker call volume: Press (UP)
or (DOWN) key during conversation.
• Ringer Volume: Press (UP) or (DOWN) key while ring tone
is playing.
• Soft Ring Volume: Press (UP) or (DOWN) key while Soft
Ring is playing.
• Enter:
• Press to select the highlighted menu item.
• Cursor Pad Within Menu Screens:
• Up - Move the highlighted area one line up the screen.
• Down - Move the highlighted area one line down the
screen.
• Left - Go back to the previous screen.
• Right - Go to the screen which corresponds to the high-
lighted menu item.
• Enter - Go to the screen which corresponds to the high-
lighted menu item.
10.Line Key - This LED is lit when you have a dial tone or are
on a telephone call. For concurrent calls, press this LED to
switch the focus between calls.
11.DESI-Less (Label-free) Page Display/Programmable
Keys/Speed Dial Keys - LCD that displays programmable
key information. Programmable keys can be Speed Dial
Keys. Press a key to automatically dial the speed dial num-
ber or star code.
12.Softkeys - The softkeys show the available features for your
current activity. Any feature shown at the bottom of the LCD
is available.
13.Exit - This key allows you to exit from the Menu or Help mode
and go back to the telephone main screen.
14.Help - Press this key to display information about the soft-
keys that are in the current LCD display.
15.LCD - Displays call information and options, Menu informa-
tion and softkeys.
16.Call Indicator Lamp -
• If missed call notification for the call indicator lamp is disabled
(default), the lamp flashes for incoming and missed calls, and
displays steady red for message waiting.
• If missed call notification for the call indicator lamp is enabled,
the lamp flashes for incoming calls and missed calls, includ-
ing missed calls where someone has left a voice mail. The
lamp only display steady red if you still have messages wait-
ing after you have cleared your missed calls.
17.Scroll - Press to scroll to the next page of Speed Dial Keys
(maximum 4 pages).
SOFTKEYS
Softkeys are buttons that change function depending on the sit-
uation. Their current function is highlighted immediately above
the button on the LCD screen.
NewCall - Generates dial tone for a call.
Voicemail - Automatically dials the voice mail extension on
your system. This feature may not be available on all systems.
Pickup - Answers calls to other users in your Pickup group from
your phone. This feature may not be available on all systems.
EndCall - Terminates the current call.
Conference/Conf - Initiates/completes a conference.
Resume - Takes the call off Hold status.
Dial - Dials the number.
Delete - Deletes the last digit entered (backspace).
Reject - Transfers call to your Voice Mail or forwarding condi-
tions.

BASIC SETTINGS

• To adjust ringer volume (handset or headset)
db
Press the up/down cursor key while on-hook.
• To adjust call volume (handset or headset):
db
Press the up/down cursor key in the off-hook status or
during a call.
• To adjust speaker volume
db
Press the up/down cursor key during speaker phone
operation, or during a call that is being played on the speaker.
• To adjust LCD contrast
Press the Menu key and select
1
tings, LCD Contrast, then use the softkeys to adjust the LCD
contrast.
• To adjust LCD Backlight Timeout
Press the Menu key and select
2
tings, LCD Backlight Timeout, then use the telephone key-
3 5
User Settings, LCD Set-
3 5
User Settings, LCD Set-
2