Adjustment Of Generator Parameters (Kv, Ma, Ms, Mas, Density); Settings - Canon Omnera 500A Operator's Manual

3.2.5 Adjustment of Generator Parameters (kV, mA, ms, mAs, Density)

In order to change the exposure values, the button with the parameter that shall be changed,
is pushed. Then the user may select to increase or decrease the value.
Note!
The Operator/User is always responsible for checking and validating the exposure parame-
ters in the Image system before performing exposure.
3.2.5.1 Exposure Index
The exposure index, EXI, is a measure of the amount of exposure received by the detector
and depends on mAs, the total detector area irridiated respective the beam attenuation. It is
indicative of the image quality.

3.2.6 Settings

The Setting menu is reached by a activating the Setting button for 1 second.
The Setting menu has the following tabs; User Settings and Service.
User settings has the following tabs: Display, Settings and Themes.
Service has the following tabs: Log, Settings and Display.
Operator´s Manual
2020-09-14
150
kV
Fig. 3-8 Adjustment of generator parameters
Fig. 3-9 Setting button
1000-095-071-EN Rev. 1.1
Page 63
User Interface
Automatic Collimator Control
150 5 5
150
OMNERA®