Disassembly; Tray Assembly - Sony MDS-JA50ES Service Manual

Note : Follow Xthe disassembly procedure in the numerical order given.

3-1. TRAY ASSEMBLY

4 Bracket
5 Two gear
(Gear 4)
7 Screw
(BVTT 3x6)
8 Stopper
(Shaft A)
• Precautions on Attaching
(Assemble in the reverse order of removal.)
Slider assembly
When attaching the tray assembly, first move the slider
assembly in the arrow direction B and set Pin A at the
position shown.
When attaching gear 4 (two in front), pull the tray
assembly in arrow direction A completely, and
position racks (L), (R) and (D) as shown in the
figure.
SECTION 3

DISASSEMBLY

2 Two screws
(BVTP 3x6)
3 Two screws
(BVTP 3x6)
(TOP)
B
0 Remove the tray assembly
in the arrow direction B .
Pin A
Rack (L)
9 Shaft
A
6 Two gear
(Gear 4)
Note:
When attaching the bracket (TOP), attach while
pressing the switch as shown in the figure.
Hole
Rack (D)
Gear 4
— 26 —
1 Rotate the pulley gear in the arrow
direction A , and pull out the tray
assembly.
Bracket (TOP)
B
A