Setting The Clock - Canon Elura Elura Instruction Manual

Setting the clock

E
(see p. 30)
1. Put the camera in record pause mode.
2. Open the menu and select D/TIME SET.
• The year display starts to flash.
3. Turn the selector dial up and down to change the year. Press the
dial in to move to another part of the display.
• Once you move from the year, the next part of the display starts flashing.
4. Set the month, day, hours, and minutes in the same way.
5. Press the MENU button when finished, and to start the clock.
• The date can be set to any year between 1999 and 2020.
• If you press the MENU button in the middle of setting the date and time the
seconds are set to zero, you leave the menu, and the clock starts.
• If you press the selector dial in after setting the minutes you can set the date
and time again from the start.
Setting the display style
Select whether you want the date, the time, or both to show up on your data code
display (p. 64).
(see p. 31)
1. Turn the POWER switch to VCR.
2. Open the menu and select D/TIME SEL.
3. Choose between DATE, TIME and DATE & TIME.
4. Press the MENU button to close the menu.
38
D/TIME SET••JAN. 1,1999
12:00 AM
D/TIME SEL.•DATE & TIME